Rules & Rugulation:

 

   ARENA DESCRIPTION:

•  Arena is divided into three main zones.
•  Zone 1 is a rectangular area with two cubes and two pits.
•  Zone 2 consists of two routes to approach the main arena.
•  Route 1 consists of a 30 degree inclined climb followed by a piped speed breaker.        

 There is also a sand pit along the way.

•  Route 2 is more of a shortcut which bypasses the above mentioned inclined climb,  

 piped speed breaker and the sand pit. However, the shortcut has a 45 degree inclined 
climb!

•  The robot has to then pass through the pit having marbles, pebbles and sand.
• There is a switch just before the ZIG-ZAG path, which opens the door at the end of   the path. The Robot has to pass through the ZIG-ZAG path and cross the door before the door closes. If the Robot fails to cross the path before the door closes, the Robot has to go back and repeat the same procedure.

              The Robot will then finally enter the MAIN ARENA
Please see below for ARENA

   General Rules:

• The maximum size of the robot can be 25*25*20 cm3.
• 30 Volt dual power supply will be supplied by us.
• The robot can be wired or wireless. In case of wireless robots the organizers will not be held responsible for jamming.
• The team comprises of 4 members including a single controller.
• Multiple entries are permitted provided the machinery is different.
• No LEGO parts will be allowed in active parts of the robot.

• Participation certificates will be given to all the teams clearing the task.
• Opponent teams will not be permitted to damage each others robots.
• In case of a controversy, the organizers and judges decision will be final and cannot be questioned.
• The robots damaging the arena in any way will be disqualified.
• IC engines will not be permitted.

Elimination Round:

• Start from zone 1.
• Traverse through the zone 2 using either of the route.
• Top 32 teams will be selected based on best timing.
• In case of a tie, the team with less penalties goes through.
• These 32 will then proceed to the knock out rounds.

Knock out Round:

• Teams will compete on a knock out basis.
• Half of the teams will be eliminated in each successive round.
• Each round will have some modifications which will be revealed on the spot.
• No changes in the machinery will be required for these modifications.
• Top 4 teams will advance to the semi finals.

Rounds

• The two cubes in zone 1 are to be compulsorily placed in the pits.
• The teams then have to proceed to the main arena through zone 2, using either of the route.  
•   There will be 7 balls each having a different value.
• The team scoring the highest points wins.

Penalties:

•  If the robot falls of the track at any time of the race, 5 points will be deducted.
•  Handling the robot will lead to deduction of 5 points and then the race will continue   

 from the previous checkpoint.

•  Any damage to the track will lead to disqualification.

 
We request you not to assume anything without discussing with us. We believe that “to err is human” and coordinators are human. So, please feel free to inform us about any errors in the documents or any point we have miss out.

 

Schedule:

  Day 1st

On the spot registration will be available.

Start of elimination round.

Result of elimination round.

 Day 2nd

Knock out round.

Result of final knock out round.

 Day 3rd

Semi-final   &   final round.

Result   of  final round.

Prize  Distribution.

 

Contact   detail:-

Swapnil  Madgulwar:-  9975588707.

Akhil  Modani:- 9970293227.